Issue link: http://e-delivery.uberflip.com/i/1546779
4 P R O D U C T C A T A L O G 2 0 2 6 | w w w . L J w e l d i n g . c o m Welding Manipulators MNC4-100 MN12-200 12' x 12' MN6-100 6' x 6' Column & Boom Manipulators LJ engineers and manufactures manipulators with boom stiffness and welding head stability, operator controls, and ease of use as key driving factors. Automatic welding heads are designed to be mounted on a stiff and nearly vibrationless boom, and moved to desired height with powered column. The welding head can then be positioned as required for automated welding of large vessels or structural steel. CUSTOM SIZES AVAILABLE SPECS MNC4-100 4' x 4' MNP-600 4' x 5' MN9-400 9' x 9' MN12-200 12' x 12' MN16-100 (custom) 16' x 16' Load Capacity (at Boom End): 250 lb 250 lb 500 lb 500 lb 500 lb Boom Stroke: 48" (26½" – 74½") 42" (30" – 72") 108" (30" – 138") 144" (30" – 174") 187" (50.6" – 237.6") Column Stroke: 48" (49" – 97") 59" (33" – 92") 108" (24" – 132") 144" (24" – 168") 186" (18.5" – 204.5") Boom Travel Speed: 10/50 in/min (2-speed) — 5 – 120 in/min 5 – 120 in/min 5 – 120 in/min Column Travel Speed: 10/50 in/min (2-speed) — 5 – 120 in/min 5 – 120 in/min 12 – 120 in/min Power Requirements: 110 V, 1-ph, 15 A, 60 Hz* 120 V, 1-ph, 15 A* 480 V, 3-ph, 60 Hz* 480 V, 3-ph, 60 Hz* 480 V, 3-ph, 100 A, 60 Hz* Equipment Mass**: ~1,900 lb ~4,400 lb ~8,500 lb ~9,000 lb 9,500 lb * 208 - 600V, 50 or 60 Hz input power options available. Specifications subject to change; consult factory for all specifications. Equipment mass not including attachments. ** base machine weight Available Options Control platform (Joystick or fully integrated touchscreen options) SAW or GMAW welding systems (Single, Twin, or Tandem wire) Cold Wire TIG Systems Powered cross slides (1 or 2 axis) Weld Camera systems (SAW or Open Arc) Seam Tracking (Vision/Laser or Tactile/Mechanical) Travel Car (Powered or Manual) Pre-heating system (Rolling Induction Heater) Flux Recovery and delivery systems Dual SAW or MIG/SAW set-ups Standard Features 480Volt, 3Phase input power (Other voltages available) Boom Traverse, Mast Traverse and Travel Car Speed: 5-120 in/min Adjustable Rotation Stops (up to 355º) Variable speed boom and column controls (in/out, up/down) Fully or semi-automate any welding system Typical Max. Deposition Rates* Single Weld Head Dual Weld Head Single Wire Up to 25 lb/hr Up to 50 lb/hr Tandem Wire Up to 40 lb/hr Up to 80 lb/hr * Using 1,000 amp sub-arc power source.