Issue link: http://e-delivery.uberflip.com/i/389239
1- 800-847-5625 www.seclock.com 4 Entry Trim 3001/3002 Satin stainless steel pulls have 2-3/4" x 11-1/2" escutcheon. Order with or without a cylinder hole. For steel and wood doors. 3001 Tubular pull 3002 Flat cross-section Fixed Pulls A single or dual (SPDT) switch can be mounted on the hinge end of the pushbar to activate lights, horns, monitors or maglocks. Can be factory installed or retrofit in the field to existing exit devices. The SE motorized latch retraction option boasts not only near-silent operation, but a low current draw (.4 amps run .2 amps hold) that allows for lighter gauge wiring and a reduced amperage power supply. Delivers up to 100 lbs preload release. Available with the 3000, 8000 Series Exit Devices and the RITE Door®. Order PS-SE Power Supply separately. (PS-SE powers 2 devices). Rated for continuous duty. A holding magnet allows the dogging of life-safety and fire-rated exit devices when energized. Manually depressing the bar holds the device in the dogged position. Turning off the power to the device returns the bar to the latched position. Requires 24 VDC power. 8099M Pushbar Pushbar with no latching mechanism on doors not requiring an exit device. Wired with a single (M1) or dual (SPDT) monitor/signal switch (M2). 8099 Dummy Non-operable. Fixed pushbar. Emits a loud alarm to notify of any unauthorized exit. Will not alter the life-safety characteristics of the exit device. Available options: self-contained alarm with four AA batteries or hardwired alarm with Nicad battery back-up. For all non-rated Adams Rite Exit Devices. For control of dogging by using any standard 15/16" to 1-1/8" mortise cylinder with MS® cam. Cannot be used with Alarm or LR option. Electric Dogging Alarmed Exit Device Options and Accessories Motorized Latch Retraction Monitor/Signal Switch Monitored Pushbars Cylinder Dogging Standard Levers: Each model shares the same core components, so levers can be changed without having to replace the entire trim. A break away clutching mechanism protects the handle from vandalism or forced entry. Available in a wide range of architectural finishes to match the pushbar. Order with or without a cylinder hole. eTrim™ allows doors to remain locked, but can be remotely unlocked in the event of a fire or other emergency. Specify 12 or 24 VDC. Order with or without a cylinder hole. 3080 Series 3080E Series Electrified 3080-03 3080-02 3080-01 3080-MD 3080-MJ Designer Levers: 3080-ME 3080-MV 3080-MN 3080-MI 3080-MG 3080-MW EXIT DEVICES