E-Delivery

1- 800-847-5625 www.seclock.com 8 Options and Accessories ELECTRIC STRIKE FACEPLATE FINISHES Provides an audible indication that strike has been activated. Works with 12, 16 or 24 volt DC strikes. Converts 120 VAC current to 24 VAC (40VA) only. Plugs into a standard wall outlet. 2 amp rectifier converts low voltage AC current to DC of same voltage. 29-0218 Piezohorn For centerhung doors, thick doors or other conditions that vary from the "standard". Available in a variety of lengths from 1-1/2" to 3". Lip Extensions 4606 Transformer Converts 120 VAC current to 12 or 24 VAC. Can be mounted to a standard electrical junction box. 4605 Dual-Voltage Transformer 4603 Rectifier Monitoring strikes enable the operator to get a visual or audible signal of the strike's condition. Two sensor switches are added to the strike, allowing for a variety of configurations. Not available for the 7100 Series. Monitor Switches Voltage 7200 Series 7400 Series 7100 and 7200 Series 7400 Series Volts AC Int. DC or AC Volts AC DC Cont. 12 1.42 0.33 12 0.163 0.440 16** 1.03 0.22 16 0.228 0.458 24 0.74 0.17 24 0.084 0.230 **Option not available for the 7100 Series. Current Draw/Amps Available in a range of AC and DC. DC and AC Continuous units are silent, AC Intermittent units "buzz" on operation. The unit must be supplied with the rated voltage when being operated. This means proper gauge wire for its length of run and a transformer rated for the current requirements of the strike. Number Finish 626 Satin Chrome 630 Satin Stainless 74R1 and 74R2 Ritecoat Finish Number to Match 130 628 Clear Anodized 121 313 Dark Bronze Anodized 119 335 Black Anodized Consult factory for special finishes. Not all finishes available for all strikes. Number Finish 628 Clear Anodized 605 Bright Brass 612 Satin Bronze 611 Bright Bronze 313 Dark Bronze Anodized 335 Black Anodized 629 Bright Stainless 630 Satin Stainless 606 Satin Brass 7100 Series Number Finish 628 Clear Anodized 313 Dark Bronze Anodized 335 Black Anodized

• Cover